Page 9 - AQUAS FLOORING E-CATALOG
P. 9
FLOORING INSTALLATION GUIDE LINES
Flatness: The paving of Aquas ooring requires a Allow a minimum 8-10MM gap between Aquas
higher level of atness of the sub oor. ooring and wall for aquas ooring expansion. If
the room is particularly long and wide, the gap
Therefore, when deciding to use the Aquas oo- should be widened accordingly or T-molding
ring, the original ground must be leveling (terraz- should be used as partitions if the length or width
zo, ceramic tiles, oor paint, etc. can be laid greater than 10 meter.
directly), Sub oor should be at within a
Insu cient reserved gap can easily cause oor
tolerance of 3mm per 2 meter , otherwise, arching and tile like deformation.
self-leveling cement should be used for leveling.
Indoor temperature: Aquas ooring is suitable Accessories: Reducer, Quarter round, T-moul-
for indoor environment, not suitable for outdoor ding should not prevent the oor from oating.
environment where exposed to sunlight. After the
oor arrives at the site, it should be left unpacked Even no heavy furniture should be placed on the
for 24-48 hours to acclimate to let the thermal ooring as this will block the oor from expansion
expansion and contraction rate of the oor same and contraction.
as the new environment.
Standard:
* *
* Terms and conditions applied.
