Page 27 - IMPRESSIVE LUXURY & LUXUS FLOORING E-CATALOG
P. 27
SPC FLOORING INSTALLATION GUIDE LINES
Flatness: The paving of SPC oor requires a Allow a minimum 8-10MM gap between SPC oor
higher level of atness of the sub oor. Often the and wall for spc oor expansion. If the room is
atness of the sub oor directly determines particularly long and wide, the gap should be
whether the SPC oor can be used. widened accordingly or T-molding should be
used as partitions if the length or width greater
Therefore, when deciding to use the SPC oor, the than 10 meter.
original ground must be leveling (terrazzo,
Insu cient reserved gap can easily cause oor
ceramic tiles, oor paint, etc. can be laid directly), arching and tile like deformation.
Sub oor should be at within a tolerance of 3mm
per 2 meter , otherwise, self-leveling cement
should be used for leveling.
Indoor temperature: SPC oor is suitable for Accessories: Reducer, Quarter round, T-moul-
indoor environment, not suitable for outdoor ding should not prevent the oor from oating.
environment where exposed to sunlight and
driving. After the oor arrives at the site, it should Even no heavy furniture should be placed on the
be left unpacked for 24-48 hours to acclimate to ooring as this will block the oor from expansion
let the thermal expansion and contraction rate of and contraction.
the oor same as the new environment.
The room temperature should be controlled
between 18-29 degree Celsius to avoid sun
exposure before installation.
Underlayment: It is recommended to use Maintenance: SPC oor does not need special
1.0mm underlayment, and it is forbidden to use maintenance, regular cleaning is enough.
underlayment over 2.0mm. Especially for SPC
oors with a thickness of 4MM,if the sub oor Avoid exposure to direct sunlight for prolonged
uneven, underlayment too thick, which can easily periods of time. Do not roll or drag heavy objects
cause the click to break and trip. across your oor. Do not polish or wax or steam
clean the oor.
